lIIPPPPPPPP/4/3jQ[[[[[[[[[[[[[[[[[[[[[[0 74 Property Sets [Hardware Properties Version Info] 1 Properties {Version} The current version of this property file Int 256 || 0 [XY Stage] 11 Properties {MoveFieldRightSign} Do X position values increase (1) or decrease (-1) when panning right (field moving to the right)? Int 1 || 0 {MoveFieldDownSign} Do Y position values increase (1) or decrease (-1) when panning down (field moving down)? Int 1 || 0 {MoveFieldRightSign - Camera 2} Do X position values increase (1) or decrease (-1) when the field moves right? Int 1 || 0 {MoveFieldDownSign - Camera 2} Do Y position values increase (1) or decrease (-1) when the field moves down? Int 1 || 0 {MoveFieldRightSign - Camera 3} Do X position values increase (1) or decrease (-1) when the field moves right? Int 1 || 0 {MoveFieldDownSign - Camera 3} Do Y position values increase (1) or decrease (-1) when the field moves down? Int 1 || 0 {MoveFieldRightSign - Camera 4} Do X position values increase (1) or decrease (-1) when the field moves right? Int 1 || 0 {MoveFieldDownSign - Camera 4} Do Y position values increase (1) or decrease (-1) when the field moves down? Int 1 || 0 {Enable XY Position Query} Should the XY stage be queried after each move to determine the actual position? Bool false || 0 {Rotate Computed Montage 90 Degrees} Is the camera rotated 90 degrees relative to the XY stage? That is, when you move the X axis of the stage, the image moves in the Y axis of the focus window. Bool false || 0 {Enable Home Command Override} Should the user be prompted with the option to override the home button in the XY tab of the focus window and the multiwell dialog box? Bool false || 0 [DEBUG Simultaneous Capture] 4 Properties {Split Capture Number of Frames} How many pieces should the camera be split into? Int 2 || 0 {Split Capture Vertical Calibration} Is the split-camera calibration done vertically? Bool true || 0 {Channel Registration Parameters} Six parameters that define the affine transformation from the more magnified camera to less magnified camera. String "" "" 0 {Less Magnified Camera} Which of the two cameras is less magnified (1 or 2 only)? Int 1 || 0 [DEBUG Olympus MAL] 6 Properties {Brightfield shutter delay (open)} How long does it take the voltage brightfied shutter to open (ms)? Int 3000 || 0 {Brightfield shutter delay (close)} How long does it take the voltage brightfield shutter to close (ms)? Int 250 || 0 {Enable IX81-ZDC2} Does the IX-81 have a ZDC2 autofocus unit? Bool false || 0 {Open BX61 FL shutter (filter turret)} Automatically open the fluorescence shutter when the BX61 filter turret is initialized? Bool false || 0 {Open IX81 SH1 shutter (filter turret)} Automatically open the SH1 shutter when the IX81 filter turret is initialized? Bool false || 0 {Open IX81 SH2 shutter (filter turret)} Automatically open the SH2 shutter when the IX81 filter turret is initialized? Bool false || 0 [Olympus MS-2000 TIRF] 28 Properties {Default Filter Position} What filter position should be selected on startup? Int 0 || 0 {Enable Axis A} Should control of axis A be enabled? Bool true || 0 {Enable Axis B} Should control of axis B be enabled? Bool true || 0 {Enable Axis C} Should control of axis C be enabled? Bool false || 0 {Position 0 - Axis A} Filter position 0 - Axis A Int 0 || 0 {Position 0 - Axis B} Filter position 0 - Axis B Int 0 || 0 {Position 0 - Axis C} Filter position 0 - Axis C Int 0 || 0 {Position 1 - Axis A} Filter position 1 - Axis A Int 0 || 0 {Position 1 - Axis B} Filter position 1 - Axis B Int 0 || 0 {Position 1 - Axis C} Filter position 1 - Axis C Int 0 || 0 {Position 2 - Axis A} Filter position 2 - Axis A Int 0 || 0 {Position 2 - Axis B} Filter position 2 - Axis B Int 0 || 0 {Position 2 - Axis C} Filter position 2 - Axis C Int 0 || 0 {Position 3 - Axis A} Filter position 3 - Axis A Int 0 || 0 {Position 3 - Axis B} Filter position 3 - Axis B Int 0 || 0 {Position 3 - Axis C} Filter position 3 - Axis C Int 0 || 0 {Position 4 - Axis A} Filter position 4 - Axis A Int 0 || 0 {Position 4 - Axis B} Filter position 4 - Axis B Int 0 || 0 {Position 4 - Axis C} Filter position 4 - Axis C Int 0 || 0 {Position 5 - Axis A} Filter position 5 - Axis A Int 0 || 0 {Position 5 - Axis B} Filter position 5 - Axis B Int 0 || 0 {Position 5 - Axis C} Filter position 5 - Axis C Int 0 || 0 {Position 6 - Axis A} Filter position 6 - Axis A Int 0 || 0 {Position 6 - Axis B} Filter position 6 - Axis B Int 0 || 0 {Position 6 - Axis C} Filter position 6 - Axis C Int 0 || 0 {Position 7 - Axis A} Filter position 7 - Axis A Int 0 || 0 {Position 7 - Axis B} Filter position 7 - Axis B Int 0 || 0 {Position 7 - Axis C} Filter position 7 - Axis C Int 0 || 0 [Olympus DP Camera] 1 Properties {Camera Exposure Length Denominator} What is the denominator for the exposure time? Choosing 1000 will result in millisecond capture increments (1/1000 of a second per exposure time increment). Int 1000 || 0 [DEBUG Focus Window] 14 Properties {XY Stage Left/Right Invert} Invert direction of movement for XY stage left/right move buttons Bool false || 0 {XY Stage Up/Down Invert} Invert direction of movement for XY stage up/down move buttons Bool false || 0 {Live image lock timeout} How long to wait for the live image update before aborting (for debugging only, ms)? Int 0 || 0 {Microscope status update interval} How long should each scope hardware update interval last (ms)? Int 300 || 0 {Default Live Window Width} How wide (in pixels) should live image window default to (use -1 to automatically size the window)? Int -1 || 0 {Camera - eye buttons} Enable camera-eyepiece buttons Bool false || 0 {Camera Settings Post Delay} Delay after setting camera properties in camera tab (ms) Int 100 || 0 {EnableFLAutoToggle} If the fluorescence shutter is open, do you want the fluorescence shutter to automatically close and then re-open when changing between fluorescent filters? This is useful for devices such as the DG-4. Bool false || 0 {Camera Video Prism Pos 1 Description} Text description for camera video prism 1 radio button in scope tab (default: Camera) String "Camera" "Camera" 0 {Camera Video Prism Pos 2 Description} Text description for camera video prism 2 radio button in scope tab (default: Video) String "Video" "Video" 0 {StopFocusDuringStream} Should the focus window stop the image capture thread when spool capture is started? Bool false || 0 {Update Z Step Size Automatically} Should the focus window user-defined Z step size be updated automatically when a user changes filters? Bool false || 0 {Set Intensification Per Filter} Should the camera intensification be saved on a per-filter basis and automatically change when the user changes filters in the focus window? Bool false || 0 {Set Exposure Time Per Filter} Should the exposure time be saved on a per-filter basis and automatically change when the user changes filters in the focus window? Bool false || 0 [DEBUG FRAP Parameters] 27 Properties {Enable two axis calibration} Should the calibration be done using a transformation matrix (this can help compensate for camera rotation)? Bool true || 0 {Default Photomanipulation Filter} What is the name of the default photomanipulation filter configuration? String "" "" 0 {Mosaic Laser Duration} Default duration of Mosaic laser when triggered (ms) Int 5000 || 0 {Mosaic Laser Powerup Duration} How long does the Mosaic laser take before it is fully powered up from standby? (ms) Int 250 || 0 {Mosaic DMD Powerup Duration} How long does the Mosaic DMD take to initialize after power-on pulse supplied? (ms) Int 500 || 0 {Mosaic Shutter Close Time} How long does the Mosaic laser shutter take to close? (ms) Int 30 || 0 {Mosaic DMD Oversample} How much should the DMD raster oversample? Int 1 || 0 {Mosaic DMD Oversample DMD Size} How much should the DMD raster oversample (DMD pixels)? Int 1 || 0 {Mosaic DMD Oversample DMD Direct} Enable direct DMD oversample? Bool true || 0 {Mosaic Laser Enable TTL Line} What digital output line is used to power up the Mosaic laser from standby to full power (set to -1 to disable)? Int 0 || 0 {Mosaic Shutter TTL Line} What digital output line is used to open and close the Mosaic shutter (set to -1 to disable)? Int 1 || 0 {FRAPPulseDelay} What is the minimum wait time required between two Micropoint nitrogen laser pulses (ms)? Int 50 || 0 {FRAPRepDelay} How long should the delay between FRAP repetitions be when performing FRAP during capture (ms)? Int 0 || 0 {FRAP Calibration X0} FRAP device coordinate X0 for calibration (smallest legal X value) Int 64 || 0 {FRAP Calibration X1} FRAP device coordinate X1 for calibration (largest legal X value) Int 192 || 0 {FRAP Calibration Y0} FRAP device coordinate Y0 for calibration (smallest legal Y value) Int 64 || 0 {FRAP Calibration Y1} FRAP device coordinate Y1 for calibration (largest legal Y value) Int 192 || 0 {Number of calibration steps} How many calibration steps should be used to calibrate the FRAP system? Steps will be evenly spaced between X0Y0 and X1Y1. Int 15 || 0 {Axis Flip Tolerance} When determining axis flip how large should the tolerance be (a perfectly aligned FRAP unit will have the same Y coordinate for both axis calibration points)? Int 100 || 0 {Enable Intensity Calibration} Should the calibration points be computed using the maximum weighted inetnsity? Disable when calibrating using a bleaching sample. Bool true || 0 {Manual Laser Trigger} Should the user manually trigger the Mosaic laser for ablation? Select if you do not have the TTL module. Bool true || 0 {Micropoint (TTL) X Axis Maximum} What is the maximum value of the X axis galvo move for a TTL-based Micropoint? Int 255 || 0 {Micropoint (TTL) Y Axis Maximum} What is the maximum value of the Y axis galvo move for a TTL-based Micropoint? Int 255 || 0 {FRAP NiDAQ Board ID} What is the device ID of the NiDAQ board used to control the micropoint controller? Int 255 || 0 {Micropoint FRAP Step Size} What is the step size in pixels for rasterizing a Micropoint FRAP region? Int 8 || 0 {Streaming FRAP log file} Enable streaming FRAP log file? Bool false || 0 {Enable FRAP Filter Sequence} Enable FRAP filter sequence for streaming FRAP interface. Bool false || 0 [Ablate! Photomanipulation] 14 Properties {Disable LaserStack Power Control} Should the LaserStack power control be hidden? Set to true for Ablate + Vector systems that are not connected to a LaserStack. Bool false || 0 {Serial port baud rate} Serial port baud rate Int 19200 || 0 {Serial transmission delay} Serial port transmission delay (ms) Int 10 || 0 {Serial receive delay} Serial port receive delay (ms) Int 75 || 0 {Stepper motor index} Stepper motor index Int 0 || 0 {Stepper motor step size} Stepper motor step size Int -12 || 0 {Stepper motor speed} Stepper motor speed (maximum) Float 800.000000 || 0 {Stepper motor acceleration} Stepper motor acceleration Float 60000.000000 || 0 {Stepper motor current} Stepper motor current (maximum) Float 0.500000 || 0 {Ablate! laser startup delay} How long does the Ablate! laser take to start up (ms)? Int 1000 || 0 {Ablate! external interlock connected} Is the Ablate! laser configured with an external interlock (typically yes in epi configurations)? Bool false || 0 {Ablate! filter name} What is the name of the filter used for Ablate!? Leave blank to allow all filters to work with ablate. String "" "" 0 {Ablate! laser on time} How long should the ablate laser be left on before it is powered down (ms)? Int 300000 || 0 {Ablate! internal fire trigger} Is the ablate fire signal triggered internally? Bool false || 0 [Vector FRAP] 11 Properties {Array X Extent} Galvonometer x axis extent Int 6000 || 0 {Array Y Extent} Galvonometer y axis extent Int 6000 || 0 {Voltage step size} Voltage step size (mv) Float 1.000000 || 0 {Point Dwell Time} Dwell time per point (ms) Int 1 || 0 {Vector FRAP Step} Step size for Vector FRAP raster Int 10 || 0 {Blanking Override Line} Digital output line used for blanking override (-1 to ignore) Int -1 || 0 {Enable Oversampling} Enable Vector FRAP oversampling Bool false || 0 {Oversample size} Oversample size for Vector FRAP raster Int 2 || 0 {Stimulation trigger line} Digital out line used to synchronize external recording during photostimulation sequences Int 2 || 0 {Vector Stimulation Free Run Trigger Input} What is the name of the internal time base used for free run of the vector potostimulation trigger? String "20MHzTimebase" "20MHzTimebase" 0 {Photomanipulation 2P Laser Source} Is the laser source for the photomanipulation Vector shuttered by the 2P scanning system Pockels cell? Bool false || 0 [Manual FRAP] 1 Properties {Manual FRAP Duration} Duration for manual FRAP pulse (ms) Int 0 || 0 [DEBUG Advanced Capture Settings] 12 Properties {ShutterBrightFieldTimelapse} Should the brightfield shutter close between brightfield timelapse images? Bool false || 0 {EnableTTLDisabledInformation} Should an explanation of why rapid TTL capture was disabled be displayed during capture (for debugging purposes only)? Bool false || 0 {TTLTriggerToggleMode} Should digital output tied to notes buttons toggle on and off rather than output pulse of specified duration? Bool false || 0 {File Size Warning Limit} How large should slide files be allowed to grow before SlideBook warns the user they are too large (MB)? Int 8192 || 0 {Suppress Save Progress Dialog} Should SlideBook disable the save file progress dialog box? Bool false || 0 {Suppress Network File Warning Dialog} Should SlideBook disable the warning to not capture image data to a network file? Bool false || 0 {Suppress Save Recommendation Dialog} Should SlideBook disable the prompt to save unsaved files prior to capturing image data? Bool false || 0 {Automatically Reopen Focus/Capture Dialogs} Should the focus and capture windows re-open by default following capture? Bool false || 0 {Automatically renormalize capture data} Should the default view of newly captured monochrome data be renormalized to the actual channel minimum and maximum values? Setting this property to false will renormalize all monochrome data to the camera minimum and maximum. Default RGB color camera data renormalization will remain unchanged regardless of setting. Bool true || 0 {Automatically renormalize test capture} Should the preview display of monochrome Image > Capture test exposures be renormalized to the actual channel minimum and maximum values? Setting this property to false will renormalize all monochrome data to the camera minimum and maximum. RGB color camera data renormalization will remain unchanged regardless of setting. Bool true || 0 {White balance bias offset} Fixed offset to subtract from individual component values during white balance computation. Int 0 || 0 {Minimum rectangular ROI dimension} Minimum width and height of a rectangular ROI. Int 10 || 0 [LaserStack Settings] 8 Properties {Laser 1 emission} What is the emission wavelength of laser 1 (nm)? String "405" "405" 0 {Laser 2 emission} What is the emission wavelength of laser 2 (nm)? String "440" "440" 0 {Laser 3 emission} What is the emission wavelength of laser 3 (nm)? String "488" "488" 0 {Laser 4 emission} What is the emission wavelength of laser 4 (nm)? String "515" "515" 0 {Laser 5 emission} What is the emission wavelength of laser 5 (nm)? String "561" "561" 0 {Laser 6 emission} What is the emission wavelength of laser 6 (nm)? String "640" "640" 0 {Laser 7 emission} What is the emission wavelength of laser 7 (nm)? String "" "" 0 {Laser 8 emission} What is the emission wavelength of laser 8 (nm)? String "" "" 0 [CrystalTech AODS] 9 Properties {Command Delay} How long in milliseconds does it take for a command to be processed? Int 50 || 0 {Channel 0 Gain} Default gain for AODS channel 0 (alternate source position 1) Int 5000 || 0 {Channel 1 Gain} Default gain for AODS channel 1 (alternate source position 2) Int 5000 || 0 {Channel 2 Gain} Default gain for AODS channel 2 (alternate source position 3) Int 5000 || 0 {Channel 3 Gain} Default gain for AODS channel 3 (alternate source position 4) Int 5000 || 0 {Channel 4 Gain} Default gain for AODS channel 4 (alternate source position 5) Int 5000 || 0 {Channel 5 Gain} Default gain for AODS channel 5 (alternate source position 6) Int 5000 || 0 {Channel 6 Gain} Default gain for AODS channel 6 (alternate source position 7) Int 5000 || 0 {Channel 7 Gain} Default gain for AODS channel 7 (alternate source position 8) Int 5000 || 0 [DEBUG PVCAM] 53 Properties {HQ II Visual Gain} Should SlideBook enable visual gain on the HQ II? This enables the camera to take non-quantitative data and is not recommended (it accessed via camera intensification). Bool false || 0 {Dual Camera Rapid 4D Trigger First Mode} Should the PVCAM driver use TRIGGER_FIRST_MODE instead of STROBE_MODE from camera 2 in dual camera rapid 4D streaming? Bool false || 0 {Dual Camera Rapid 4D Software Trigger Mode} Should the PVCAM driver use software TIMED_MODE for dual camera rapid 4D streaming? Bool false || 0 {Dual Camera Clear Pre Sequence} Should the PVCAM driver use CLEAR_PRE_SEQUENCE instead of CLEAR_PRE_POST_SEQUENCE in dual camera streaming? Bool false || 0 {Disable Callbacks} Should the PVCAM driver disable the use of all callback functions? Bool true || 0 {Suppress Temperature Readout} Should temperature readout be suppressed on all PVCAM cameras? Cameras will cool properly but display NA in the temperature readout. Bool false || 0 {Force Bounds Changes} Should the PVCAM driver force a bounds reset for every exposure (for debugging only)? Bool false || 0 {Number of PVCAM Free Run Buffer} How many frames should be allocated for free run buffer capture? Increase if you are experiencing timeouts during streaming capture. Int 10 || 0 {Set PVCAM Camera 0 Cooling Temperature} Should SlideBook set the cooling set point for PVCAM camera 0? Bool false || 0 {PVCAM Camera 0 Cooling Temperature} What should the cooling set point be for PVCAM camera 0 (C)? Int 0 || 0 {Set PVCAM Camera 1 Cooling Temperature} Should SlideBook set the cooling set point for PVCAM camera 1? Bool false || 0 {PVCAM Camera 1 Cooling Temperature} What should the cooling set point be for PVCAM camera 1 (C)? Int 0 || 0 {Set PVCAM Camera 2 Cooling Temperature} Should SlideBook set the cooling set point for PVCAM camera 2? Bool false || 0 {PVCAM Camera 2 Cooling Temperature} What should the cooling set point be for PVCAM camera 2 (C)? Int 0 || 0 {Set PVCAM Camera 3 Cooling Temperature} Should SlideBook set the cooling set point for PVCAM camera 3? Bool false || 0 {PVCAM Camera 3 Cooling Temperature} What should the cooling set point be for PVCAM camera 3 (C)? Int 0 || 0 {PVCAM Camera 0 Custom Name} Should PVCAM camera 0 be opened using a specific camera name? Leave blank for dynamic camera loading or if you experience problems initializing the camera. String "" "" 0 {PVCAM Camera 1 Custom Name} Should PVCAM camera 1 be opened using a specific camera name? Leave blank for dynamic camera loading or if you experience problems initializing the camera. String "" "" 0 {PVCAM Camera 2 Custom Name} Should PVCAM camera 2 be opened using a specific camera name? Leave blank for dynamic camera loading or if you experience problems initializing the camera. String "" "" 0 {PVCAM Camera 3 Custom Name} Should PVCAM camera 3 be opened using a specific camera name? Leave blank for dynamic camera loading or if you experience problems initializing the camera. String "" "" 0 {Disable Frame Transfer Mode} Should the camera disable frame transfer mode and run in PMODE_NORMAL? Bool false || 0 {PVCAM Camera 0 X Left Offset} How many pixels should the full chip image of camera 0 exclude from the left side of the CCD? Int 0 || 0 {PVCAM Camera 0 Y Top Offset} How many pixels should the full chip image of camera 0 exclude from the top of the CCD? Int 0 || 0 {PVCAM Camera 0 X Right Offset} How many pixels should the full chip image of camera 0 exclude from the right side of the CCD? Int 0 || 0 {PVCAM Camera 0 Y Bottom Offset} How many pixels should the full chip image of camera 0 exclude from the bottom of the CCD? Int 0 || 0 {PVCAM Camera 0 Default Port} Default camera port for camera 0 (-1 to disable) Int -1 || 0 {PVCAM Camera 0 Default Gain} Default camera gain for camera 0 (-1 to disable) Int -1 || 0 {PVCAM Camera 0 Default Speed} Default camera speed for camera 0 (-1 to disable) Int -1 || 0 {PVCAM Camera 0 Default Intensification} Default camera intensification for camera 0 (-1 to disable) Int -1 || 0 {PVCAM Camera 1 X Left Offset} How many pixels should the full chip image of camera 1 exclude from the left side of the CCD? Int 0 || 0 {PVCAM Camera 1 Y Top Offset} How many pixels should the full chip image of camera 1 exclude from the top of the CCD? Int 0 || 0 {PVCAM Camera 1 X Right Offset} How many pixels should the full chip image of camera 1 exclude from the right side of the CCD? Int 0 || 0 {PVCAM Camera 1 Y Bottom Offset} How many pixels should the full chip image of camera 1 exclude from the bottom of the CCD? Int 0 || 0 {PVCAM Camera 1 Default Port} Default camera port for camera 1 (-1 to disable) Int -1 || 0 {PVCAM Camera 1 Default Gain} Default camera gain for camera 1 (-1 to disable) Int -1 || 0 {PVCAM Camera 1 Default Speed} Default camera speed for camera 1 (-1 to disable) Int -1 || 0 {PVCAM Camera 1 Default Intensification} Default camera intensification for camera 1 (-1 to disable) Int -1 || 0 {PVCAM Camera 2 X Left Offset} How many pixels should the full chip image of camera 2 exclude from the left side of the CCD? Int 0 || 0 {PVCAM Camera 2 Y Top Offset} How many pixels should the full chip image of camera 2 exclude from the top of the CCD? Int 0 || 0 {PVCAM Camera 2 X Right Offset} How many pixels should the full chip image of camera 2 exclude from the right side of the CCD? Int 0 || 0 {PVCAM Camera 2 Y Bottom Offset} How many pixels should the full chip image of camera 2 exclude from the bottom of the CCD? Int 0 || 0 {PVCAM Camera 2 Default Port} Default camera port for camera 2 (-1 to disable) Int -1 || 0 {PVCAM Camera 2 Default Gain} Default camera gain for camera 2 (-1 to disable) Int -1 || 0 {PVCAM Camera 2 Default Speed} Default camera speed for camera 2 (-1 to disable) Int -1 || 0 {PVCAM Camera 2 Default Intensification} Default camera intensification for camera 2 (-1 to disable) Int -1 || 0 {PVCAM Camera 3 X Left Offset} How many pixels should the full chip image of camera 3 exclude from the left side of the CCD? Int 0 || 0 {PVCAM Camera 3 Y Top Offset} How many pixels should the full chip image of camera 3 exclude from the top of the CCD? Int 0 || 0 {PVCAM Camera 3 X Right Offset} How many pixels should the full chip image of camera 3 exclude from the right side of the CCD? Int 0 || 0 {PVCAM Camera 3 Y Bottom Offset} How many pixels should the full chip image of camera 3 exclude from the bottom of the CCD? Int 0 || 0 {PVCAM Camera 3 Default Port} Default camera port for camera 3 (-1 to disable) Int -1 || 0 {PVCAM Camera 3 Default Gain} Default camera gain for camera 3 (-1 to disable) Int -1 || 0 {PVCAM Camera 3 Default Speed} Default camera speed for camera 3 (-1 to disable) Int -1 || 0 {PVCAM Camera 3 Default Intensification} Default camera intensification for camera 3 (-1 to disable) Int -1 || 0 [SuperPro Network Settings] 2 Properties {Enabled} Enable Network Keys? Bool false || 0 {IP Address} Network Address for Key Server. Default: no-net String "no-net" "no-net" 0 [ASI SC2000 Settings] 2 Properties {SC2000 shutter delay} How long does the SC2000 shutter take to open and close (ms)? Int 0 || 0 {SC2000 normally closed} Is the SC2000 controller driving a normally closed shutter? Bool true || 0 [Sutter 10-3 Settings] 7 Properties {WheelSpeed} Speed setting for Sutter 10-3 wheels (0 - 7, default = 2) Int 2 || 0 {WheelTimingMode} Timing mode used for wheel delay (0 = chart, 1 = CR, 2 = static, 3 = chart + static, default = 0) Int 0 || 0 {WheelStaticDelay} Static wheel delay in ms used by static timing modes (WheelTimingMode 2, 3, default = 150 ms) Int 150 || 0 {ShutterMode} Shuttering mode (0 = fast, 1 = soft, 2 = 10-2 compatibility, default = 0) Int 0 || 0 {ShutterTimingMode} Timing mode used for shutter delay (0 = CR, 1 = static, 2 = CR + static, default = 0) Int 0 || 0 {ShutterStaticDelay} Static shutter delay in ms used by static timing modes (ShutterTimingMode 1, 2, default = 45 ms) Int 45 || 0 {Controller Baud Rate} What is the baud rate SlideBook should use to communicate with the 10-3 unit? Int 9600 || 0 [Sutter 10-2 Settings] 6 Properties {Open Shutter On Startup} Should the 10-2 shutter open automatically on startup? Bool false || 0 {WheelSpeed} Speed setting for Sutter 10-2 wheels (0 - 7) Int 2 || 0 {Static Wheel Delay} How long should the static delay be when the wheels are not in variable timed mode (ms)? Int 150 || 0 {Enable Variable Timed Mode} Should the wheel timing be based on the speed timing chart and the distance of the move? Bool false || 0 {Variabled Timed Additional Delay} What additional delay should be added to the speed timing chart when the wheel is in variable timed mode (ms)? Int 25 || 0 {Shutter Delay} How long does the Sutter 10-2 sutter take to open and close (ms)? Int 5 || 0 [Sutter DG-4 Settings] 4 Properties {DG4 Default Position} What position should the DG4 be initialized to on startup? Int 4 || 0 {DG4/10-2 Combo COM Port Setting} What COM port is the DG4 connected to when the DG4/10-2 combo configuration is enabled? Int -1 || 0 {Enable Non-Shuttered Mode} Should the DG-4 operate in non-shuttered mode (movement commenads are directly executed and the DG4 is not configured as a shutter)? Bool false || 0 {Open Fluorescence Shutter - Alt Source} Should the DG-4 open and close the fluorescence shutter when operating in alternate source mode? Bool false || 0 [Sutter MCP-200 Settings] 4 Properties {MPC-200 Old Firmware} Does the MPC-200 controller have version 1.04 or earlier firmware? Bool false || 0 {MPC-200 XY Step Size} What is the XY step size in um? Float 0.062500 || 0 {MPC-200 XY Port} Which port is the XY stage plugged into (A=1 B=2 C=3)? Int 1 || 0 {MPC-200 XY Post Move Delay} How many milliseconds should SlideBook wait after the move is reported to be complete? Int 100 || 0 [TIFF Export] 1 Properties {Default Export Format String} What should the default export formatting string be? String "%N_XY%P_Z%Z_T%T_C%C" "%N_XY%P_Z%Z_T%T_C%C" 0 [PolyTech PI] 4 Properties {ShortMoveSerialDelay} The number of milliseconds to wait after a serial Z stage move (25 ms default) Int 25 || 0 {EnableLongDelay} Should a serial move of larger than 2 microns increase the stage delay? This is necessary if the piezo stage doesn't settle after a large move. (default: "No") Bool false || 0 {ShortMoveTTLDelay} The number of milliseconds to wait after a TTL Z stage move during capture (10 ms default) Int 10 || 0 {LongMoveTTLDelay} The number of milliseconds to wait for the TTL Z stage to return to the top of the stack (30 ms default) Int 30 || 0 [Advanced Z Stage Parameters] 6 Properties {Z Capture Direction Up} Should Z capture be performed up (from smaller Z location to larger Z location)? Bool true || 0 {StaticSerialMoveDelay} The number of milliseconds to wait after a serial Z stage move during capture (ms) Int 0 || 0 {Log Z Capture} Should Z capture parameters be logged to the system log file? Bool false || 0 {StaticTTLMoveDelay} The number of milliseconds to wait after a TTL Z stage move during capture (ms) Int 0 || 0 {MaximumZStageSizeMicrons} The maximum capture depth of a 3D z stack in microns. Float 300.000000 || 0 {Enable Z Position Query} Should the Z stage be queried after each move to determine the actual position? Bool false || 0 [Olympus TTL TIRF Slider] 2 Properties {TTLLineMoveIn} The digital output line that, when pulsed, causes the TIRF slider to move in Int 1 || 0 {TTLLineMoveOut} The digital output line that, when pulsed, causes the TIRF slider to move out Int 0 || 0 [Camera 1] 4 Properties {Prism1Pos} Prism 1 (ocular photo prism) position for light to be directed to camera 1 Int 2 || 0 {Prism2Pos} Prism 2 (camera video prism) position for light to be directed to camera 1 Int -1 || 0 {Magnification Factor} What is the additional image magnification factor for camera 1? Float 1.000000 || 0 {Magnification Changer Position} Magnification changer position required for proper imaging of camera 1 (-1 = don't care) Int -1 || 0 [Camera 2] 4 Properties {Prism1Pos} Prism 1 (ocular photo prism) position for light to be directed to camera 2 Int 2 || 0 {Prism2Pos} Prism 2 (camera video prism) position for light to be directed to camera 2 Int -1 || 0 {Magnification Factor} What is the additional image magnification factor for camera 2? Float 1.000000 || 0 {Magnification Changer Position} Magnification changer position required for proper imaging of camera 2 (-1 = don't care) Int -1 || 0 [Camera 3] 4 Properties {Prism1Pos} Prism 1 (ocular photo prism) position for light to be directed to camera 3 Int 3 || 0 {Prism2Pos} Prism 2 (camera video prism) position for light to be directed to camera 3 Int -1 || 0 {Magnification Factor} What is the additional image magnification factor for camera 3? Float 1.000000 || 0 {Magnification Changer Position} Magnification changer position required for proper imaging of camera 3 (-1 = don't care) Int -1 || 0 [Camera 4] 4 Properties {Prism1Pos} Prism 1 (ocular photo prism) position for light to be directed to camera 4 Int -1 || 0 {Prism2Pos} Prism 2 (camera video prism) position for light to be directed to camera 4 Int -1 || 0 {Magnification Factor} What is the additional image magnification factor for camera 4? Float 1.000000 || 0 {Magnification Changer Position} Magnification changer position required for proper imaging of camera 4 (-1 = don't care) Int -1 || 0 [Ocular Lightpath] 3 Properties {Prism1Pos} Prism 1 (ocular photo prism) position for light to be directed to oculars Int 1 || 0 {Prism2Pos} Prism 2 (camera video prism) position for light to be directed to oculars Int -1 || 0 {Magnification Changer Position} Magnification changer position required for proper visualization through the oculars (-1 = don't care) Int -1 || 0 [Filter Set Information] 6 Properties {Filter Set 1 Label} Label for filter set 1 String "Fixed" "Fixed" 0 {Filter Set 2 Label} Label for filter set 2 String "Live" "Live" 0 {Filter Set 3 Label} Label for filter set 3 String "User 1" "User 1" 0 {Filter Set 4 Label} Label for filter set 4 String "User 2" "User 2" 0 {Filter Set 5 Label} Label for filter set 5 String "User 3" "User 3" 0 {Filter Set 6 Label} Label for filter set 6 String "User 4" "User 4" 0 [SAC] 22 Properties {SACMagShift} Total magnification shift over SAC range. Float -0.177800 || 0 {SACNeutral} Neutral setting for SAC. Int 0 || 0 {Use Original Coordinate System} Should the SAC run using the original position coordinate system (utilizing the neutral position)? Bool false || 0 {Maximum Position} If you are using the new coordinate system, what is the maximum SAC position? Int 1100 || 0 {Default Position} If you are using the new coordinate system, what is the default SAC position? Int 550 || 0 {SAC Camera} What camera index is SAC 1 attached to? Int 0 || 0 {SACMagShift - 2} Total magnification shift over SAC range. Float -0.177800 || 0 {SACNeutral - 2} Neutral setting for SAC. Int 0 || 0 {Use Original Coordinate System - 2} Should the SAC 2 run using the original position coordinate system (utilizing the neutral position)? Bool false || 0 {Maximum Position - 2} If you are using the new coordinate system, what is the maximum SAC 2 position? Int 1100 || 0 {Default Position - 2} If you are using the new coordinate system, what is the default SAC 2 position? Int 550 || 0 {SAC Camera - 2} What camera index is SAC 2 attached to? Int 0 || 0 {SACMotorSpeed} Maximum SAC motor speed. Int 2000 || 0 {mSAC Move Delay} Settling time for mSAC (ms). Int 5 || 0 {FastSAC Motor Speed} Maximum FastSAC motor speed. Int 2000000 || 0 {SACLinearCalib} Use linear search for SAC calibration. Bool false || 0 {SACLinearOptimal} Use linear search for SAC optimization. Bool false || 0 {SAC v2 EMP400 Home Delay} How long does the SAC v2 EMP400 take to home? Int 5000 || 0 {Enable SAC 2} Does this system have a second SAC attached to it? Bool false || 0 {SAC 2 Type mSAC} Is the SAC 2 an mSAC (this property supercedes the "SAC 2 Type" property)? Bool false || 0 {SAC 2 Type} Is the SAC 2 driven controlled by the SC8800 controller (all SAC devices built before 2008 are this type)? Bool true || 0 {SAC 2 COM Port} What COM port is SAC 2 attached to? Int 1 || 0 [TILL Polychrome V] 16 Properties {Enable Aperture Debugging} Enable debugging mode for Polychrome V motorized bandwidth and intensity Bool false || 0 {WL1} Wavelength (nm) of the first voltage calibration point. Float 350.000000 || 0 {V1} Voltage (v) required to emit light at the first calibration wavelength. Float -5.300000 || 0 {WL2} Wavelength (nm) of the second voltage calibration point. Float 489.000000 || 0 {V2} Voltage (v) required to emit light at the second calibration wavelength. Float 0.800000 || 0 {WL3} Wavelength (nm) of the third voltage calibration point. Float 593.000000 || 0 {V3} Voltage (v) required to emit light at the third calibration wavelength. Float 5.400000 || 0 {Close Voltage} What is the voltage (v) used to deflect all light from the sample when the shutter is closed? Int -10 || 0 {Wavelength Change Delay} How long does it take for the Polychrome V to change wavelengths (ms)? Int 3 || 0 {Enable Non-Shuttered Mode} Should the Polychrome V operate in non-shuttered mode (movement commands are directly executed and the Polychrome V is not configured as a shutter)? Bool false || 0 {Base wavelength (nm)} What wavelength (nm) does device position 0 correspond to? Int 300 || 0 {Position step size (nm)} How many nanometers correspond to each position? Int 10 || 0 {Maximum wavelength} What is the maximum wavelength the device supports (nm)? Int 700 || 0 {Enable TTL Slit Shutter} Should the Polychrome V shutter using the slit when closing to prevent all light output? Bool false || 0 {Slit Shutter Open TTL High} Does the slit open when the TTL voltage is high (+5v)? Int 0 || 0 {Slit Open-Close Delay} How long does it take the slit shutter to open and close (ms)? Int 250 || 0 [SlideBook Info] 7 Properties {Version Number} The product version String "5.5.0 (20842) " "5.5.0 (20842) " 0 {Product ID} The product name. String "SlideBook" "SlideBook" 0 {Working Directory} The working directory. String "Working Dir: C:\\Program Files\\Intelligent Imaging Innovations, Inc\\SlideBook 5.5" "Working Dir: C:\Program Files\Intelligent Imaging Innovations, Inc\SlideBook 5.5" 0 {Build Year} The year the build was done. Int 2013 || 0 {Build Month} The month the build was done. Int 2 || 0 {Enable Crash Logging Functionality} Should SlideBook save information about crashes to assist in debugging? Bool false || 0 {Enable Command Logging Functionality} Should SlideBook log command usage to assist in debugging? Bool false || 0 [Dongle Info] 4 Properties {Serial Number} The serial number of the key. Int 2740 || 0 {Location Number} The auxiliary location number of the key. Int 12368 || 0 {Support Year End} The Year support expires. Int 2014 || 0 {Support Month End} The month support expires. Int 2 || 0 [Ludl Info] 21 Properties {Enable Z Axis Linear Encoder} Enable active feedback via the Z axis linear encoder Bool false || 0 {Z Axis Drift Tolerance} How many device steps must the Z axis linear encoder detect before a corrective move is performed? Int 0 || 0 {Ludl Z Step Size} What is the microns per device step for the Ludl Z stage? Float 0.010000 || 0 {Ludl XY Step Size} What is the microns per device step for the Ludl XY stage? Float 0.100000 || 0 {Ludl XY Static Delay} How long should SlideBook wait for the Ludl XY stage to stop moving after the controller reports the move complete (ms)? Int 0 || 0 {Ludl Shutter Open Static Delay} How long should SlideBook wait for the Ludl shutter to stop moving after the controller reports the open complete (ms)? Int 0 || 0 {Ludl Shutter Open ACK Wait} How long should SlideBook wait for the Ludl shutter to acknowledge a shutter open or close? Int 250 || 0 {Ludl Shutter Close Static Delay} How long should SlideBook wait for the Ludl shutter to stop moving after the controller reports the close complete (ms)? Int 0 || 0 {Enable Ludl Debugging Mode} Enable Ludl MAC5000 debugging mode? Bool false || 0 {Serial Transmit Delay} How long should the post-transmit delay be? (ms) Int 15 || 0 {Serial Query Delay} How long does the controller take to respond to the STATUS command? (ms) Int 25 || 0 {Baud Rate} What baud rate is the Ludl controller configured to use? Int 9600 || 0 {Data Bits} How many data bits is the Ludl controller expecting to receive? Int 8 || 0 {Stop Bits} How many stop bits is the Ludl controller expecting to receive? Int 2 || 0 {Enable Parity} Is the Ludl controller configured to use a parity bit? Bool false || 0 {Odd Parity Enable} If the Ludl controller is configured to use parity, is the parity set to odd? Bool false || 0 {Wheel Static Delay} How long should the additional delay be following the Ludl wheel 'move complete' message? This may be required when using older BioPoint controllers. Int 25 || 0 {Custom Initialization Command} Custom initialization command String "" "" 0 {Custom Initialization Query} Custom initialization query string String "" "" 0 {Custom Initialization Response} Custom initialization response string String "" "" 0 {Custom Initialization Timeout} Custom initialization timeout Int 250 || 0 [TTL/DAQ - Fluorescence Shutter] 9 Properties {Enable Control} Should the fluorescence shutter be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the fluorescence shutter be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the fluorescence shutter? Int 1 || 0 {TTL Out Port} What NI port is used by the fluorescence shutter digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the fluorescence shutter? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the fluorescence shutter? Int 0 || 0 {TTL Out Invert Output} Are the fluorescence shutter digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the fluorescence shutter? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the fluorescence shutter? Int 0 || 0 [TTL/DAQ - Brightfield Shutter] 7 Properties {Enable Control} Should the brightfield shutter be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the brightfield shutter be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the brightfield shutter? Int 1 || 0 {TTL Out Port} What NI port is used by the brightfield shutter digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the brightfield shutter? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the brightfield shutter? Int 0 || 0 {TTL Out Invert Output} Are the brightfield shutter digital output lines inverted? Bool false || 0 [TTL/DAQ - Alternate Source] 9 Properties {Enable Control} Should the alternate source be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the alternate source be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the alternate source? Int 1 || 0 {TTL Out Port} What NI port is used by the alternate source digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the alternate source? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the alternate source? Int 0 || 0 {TTL Out Invert Output} Are the alternate source digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the alternate source? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the alternate source? Int 0 || 0 [TTL/DAQ - Excitation Filter] 12 Properties {Enable Control} Should the excitation filter be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the excitation filter be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the excitation filter? Int 1 || 0 {TTL In Port} What NI port is used by the excitation filter digital input lines? Int 0 || 0 {TTL In Start Line} What is the first digital input line used by the excitation filter? Int 0 || 0 {TTL In Number of Lines} How many digital input lines are used by the excitation filter? You must allocate one line per TTL input cable connected to this device. Int 0 || 0 {TTL Out Port} What NI port is used by the excitation filter digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the excitation filter? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the excitation filter? Int 0 || 0 {TTL Out Invert Output} Are the excitation filter digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the excitation filter? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the excitation filter? Int 0 || 0 [TTL/DAQ - Emission Filter] 10 Properties {Enable Control} Should the emission filter be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the emission filter be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the emission filter? Int 1 || 0 {TTL In Port} What NI port is used by the emission filter digital input lines? Int 0 || 0 {TTL In Start Line} What is the first digital input line used by the emission filter? Int 0 || 0 {TTL In Number of Lines} How many digital input lines are used by the emission filter? You must allocate one line per TTL input cable connected to this device. Int 0 || 0 {TTL Out Port} What NI port is used by the emission filter digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the emission filter? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the emission filter? Int 0 || 0 {TTL Out Invert Output} Are the emission filter digital output lines inverted? Bool false || 0 [TTL/DAQ - LCD Filter] 7 Properties {Enable Control} Should the LCD filter be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the LCD filter be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the LCD filter? Int 1 || 0 {TTL Out Port} What NI port is used by the LCD filter digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the LCD filter? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the LCD filter? Int 0 || 0 {TTL Out Invert Output} Are the LCD filter digital output lines inverted? Bool false || 0 [TTL/DAQ - Auxiliary Filter] 9 Properties {Enable Control} Should the Auxiliary filter be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the Auxiliary filter be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the Auxiliary filter? Int 1 || 0 {TTL Out Port} What NI port is used by the Auxiliary filter digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the Auxiliary filter? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the Auxiliary filter? Int 0 || 0 {TTL Out Invert Output} Are the Auxiliary filter digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the Auxiliary filter? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the Auxiliary filter? Int 0 || 0 [TTL/DAQ - Auxiliary Filter 2] 9 Properties {Enable Control} Should the Auxiliary filter 2 be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the Auxiliary filter 2 be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the Auxiliary filter 2? Int 1 || 0 {TTL Out Port} What NI port is used by the Auxiliary filter 2 digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the Auxiliary filter 2? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the Auxiliary filter 2? Int 0 || 0 {TTL Out Invert Output} Are the Auxiliary filter 2 digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the Auxiliary filter 2? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the Auxiliary filter 2? Int 0 || 0 [TTL/DAQ - ND Filter] 9 Properties {Enable Control} Should the neutral density filter be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the neutral density filter be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the neutral density filter? Int 1 || 0 {TTL Out Port} What NI port is used by the neutral density filter digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the neutral density filter? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the neutral density filter? Int 0 || 0 {TTL Out Invert Output} Are the neutral density filter digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the neutral density filter? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the neutral density filter? Int 0 || 0 [TTL/DAQ - XY Stage] 12 Properties {Enable Control} Should the XY stage be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the XY stage be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the XY stage? Int 1 || 0 {TTL In Port} What NI port is used by the XY stage digital input lines? Int 0 || 0 {TTL In Start Line} What is the first digital input line used by the XY stage? Int 0 || 0 {TTL In Number of Lines} How many digital input lines are used by the XY stage? You must allocate one line per TTL input cable connected to this device. Int 0 || 0 {TTL Out Port} What NI port is used by the XY stage digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the XY stage? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the XY stage? Int 0 || 0 {TTL Out Invert Output} Are the XY stage digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the XY stage? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the XY stage? Int 0 || 0 [TTL/DAQ - Z Stage] 9 Properties {Enable Control} Should the Z stage be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the Z stage be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the Z stage? Int 1 || 0 {TTL Out Port} What NI port is used by the Z stage digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the Z stage? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the Z stage? Int 0 || 0 {TTL Out Invert Output} Are the Z stage digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the Z stage? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the Z stage? Int 0 || 0 [TTL/DAQ - Analog Input] 5 Properties {Enable Control} Should the analog input module be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the analog input module be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the analog input module? Int 1 || 0 {Analog In Start Line} What is the first analog input line used by the analog input module? Int 0 || 0 {Analog In Number of Lines} How many analog input lines are used by the analog input module? Int 0 || 0 [TTL/DAQ - External Trigger] 15 Properties {Enable Control} Should the external digital IO module be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the external digital IO module be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the external digital IO module? Int 1 || 0 {TTL In Port} What NI port is used by the external digital IO module digital input lines? Int 0 || 0 {TTL In Start Line} What is the first digital input line used by the external digital IO module? Int 0 || 0 {TTL In Number of Lines} How many digital input lines are used by the external digital IO module? You must allocate one line per TTL input cable connected to this device. Int 0 || 0 {TTL Out Port} What NI port is used by the external digital IO module digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the external digital IO module? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the external digital IO module? Int 0 || 0 {TTL Out Invert Output} Are the external digital IO module digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the external digital IO module? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the external digital IO module? Int 0 || 0 {Digital Counter Line} What is the digital counter line used by the external digital IO module? Int 0 || 0 {Signal Generator Line} What is the signal generator line used by the external digital IO module? Int 0 || 0 {Trigger Input Line} What is the trigger input line used by the external digital IO module counter? Int 0 || 0 [TTL/DAQ - FRAP Trigger] 9 Properties {Enable Control} Should the FRAP system be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the FRAP system be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the FRAP system? Int 1 || 0 {TTL Out Port} What NI port is used by the FRAP system digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the FRAP system? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the FRAP system? Int 0 || 0 {TTL Out Invert Output} Are the FRAP system digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the FRAP system? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the FRAP system? Int 0 || 0 [TTL/DAQ - Aux ND Filter] 9 Properties {Enable Control} Should the Auxiliary neutral density filter be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the Auxiliary neutral density filter be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the Auxiliary neutral density filter? Int 1 || 0 {TTL Out Port} What NI port is used by the Auxiliary neutral density filter digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the Auxiliary neutral density filter? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the Auxiliary neutral density filter? Int 0 || 0 {TTL Out Invert Output} Are the Auxiliary neutral density filter digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the Auxiliary neutral density filter? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the Auxiliary neutral density filter? Int 0 || 0 [TTL/DAQ - TIRF] 9 Properties {Enable Control} Should the TIRF control be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the TIRF control be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the TIRF control? Int 1 || 0 {TTL Out Port} What NI port is used by the TIRF control digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the TIRF control? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the TIRF control? Int 0 || 0 {TTL Out Invert Output} Are the TIRF control digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the TIRF control? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the TIRF control? Int 0 || 0 [TTL/DAQ - Laser Power] 9 Properties {Enable Control} Should the laser power control be controlled using the DAQ board? Bool false || 0 {Enable DAQmx Driver} Should the laser power control be controlled using the DAQmx driver? Bool true || 0 {Board Number} What is the board ID number of the DAQ board used to control the laser power control? Int 1 || 0 {TTL Out Port} What NI port is used by the laser power control digital output lines? Int 0 || 0 {TTL Out Start Line} What is the first digital output line used by the laser power control? Int 0 || 0 {TTL Out Number of Lines} How many digital output lines are used by the laser power control? Int 0 || 0 {TTL Out Invert Output} Are the laser power control digital output lines inverted? Bool false || 0 {Analog Out Start Line} What is the first analog output line used by the laser power control? Int 0 || 0 {Analog Out Number of Lines} How many analog output lines are used by the laser power control? Int 0 || 0 [NEOS AOTF Properties] 28 Properties {Default Neutral Density Position} What position should the AOTF neutral density filter default to on startup? Int 100 || 0 {Number of Neutral Density Positions} How many positions should the ND filter have between 0V and the maximum voltage? Int 100 || 0 {Maximum Voltage} What is the maximum output voltage (V)? Int 5 || 0 {Enable Simultaneous Excitation} Should the AOTF be configured to allow multiple simultaneous excitation wavelengths (this requires advanced binary configuration)? Bool false || 0 {Enable Inverse Polarity} Should the TTL lines be configured to go high (+5v) to turn off a line and low (0v) to turn on a line? Bool false || 0 {AOTF Position 1 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 1? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int 3 || 0 {AOTF Position 2 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 2? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int 4 || 0 {AOTF Position 3 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 3? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int 5 || 0 {AOTF Position 4 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 4? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int 6 || 0 {AOTF Position 5 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 5? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int 7 || 0 {AOTF Position 6 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 6? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int 1 || 0 {AOTF Position 7 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 7? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 8 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 8? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 9 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 9? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 10 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 10? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 11 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 11? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 12 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 12? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 13 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 13? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 14 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 14? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 15 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 15? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 16 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 16? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 17 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 17? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 18 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 18? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 19 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 19? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 20 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 20? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Position 21 DAQ Line (relative)} What DAQ line should be activated when the AOTF is in position 21? This is relative to the start line in the TTL/DAQ configuration and not absolute (simultaneous wavelength configuration is specified in binary, see manual for assistance). Int -1 || 0 {AOTF Simultaneous Shutter Position} What DAQ lines should be activated when the AOTF is shuttered (simultaneous mode only)? Int 0 || 0 {AOTF Delay} How long does the AOTF take to move into a new position (ms)? Int 0 || 0 [TTL Shutter Properties] 3 Properties {+5V TTL Fluorescence Shutter Delay} How long does it take the TTL fluorescence shutter to open and close? (ms) Int 7 || 0 {+5V TTL Brightfield Shutter Delay} How long does it take the TTL brightfield shutter to open and close? (ms) Int 7 || 0 {+5V TTL Alt Source Shutter Delay} How long does it take the TTL alternate source shutter to open and close? (ms) Int 0 || 0 [TTL Filter Wheel] 1 Properties {Filter Wheel Move Time} How long does it take the TTL filter wheel take to move positions? (ms) Int 2000 || 0 [Analog Z Stage Control Properties] 6 Properties {Z Stage Lower Limit Microns} What is the lower limit position of the analog Z stage in microns? Float 0.000000 || 0 {Z Stage Lower Limit Millivolts} What voltage must be applied to the stage to position it at the lower limit (millivolts)? Float 0.000000 || 0 {Z Stage Upper Limit Microns} What is the upper limit position of the analog Z stage in microns? Float 100.000000 || 0 {Z Stage Upper Limit Millivolts} What voltage must be applied to the stage to position it at the upper limit (millivolts)? Float 10000.000000 || 0 {Z Stage Movement Delay} What is the total time it takes the stage to move and settle into position (ms)? Int 25 || 0 {Select minimum position on shutdown} Should the analog Z stage be set to the minimum position when SlideBook shuts down? Bool false || 0 [User Login Properties] 2 Properties {Enable User Login} Should SlideBook enable multiple-user login mode? Bool false || 0 {Enable User File Names} Should SlideBook automatically append the user's name to the beginning all new slide titles? Bool false || 0 [Andor Properties] 15 Properties {EM gain mode - camera 1} What should EM gain mode for camera 1 be set to? (-1 = default, 0 = 8 bit, 1 = 12 bit, 2 = linear, 3 = real) Int -1 || 0 {Camera index - camera 1} What Andor camera index should camera 1 be initialized using (-1 = default order)? Int -1 || 0 {EM gain mode - camera 2} What should EM gain mode for camera 2 be set to? (-1 = default, 0 = 8 bit, 1 = 12 bit, 2 = linear, 3 = real) Int -1 || 0 {Camera index - camera 2} What Andor camera index should camera 2 be initialized using (-1 = default order)? Int -1 || 0 {EM gain mode - camera 3} What should EM gain mode for camera 3 be set to? (-1 = default, 0 = 8 bit, 1 = 12 bit, 2 = linear, 3 = real) Int -1 || 0 {Camera index - camera 3} What Andor camera index should camera 3 be initialized using (-1 = default order)? Int -1 || 0 {EM gain mode - camera 4} What should EM gain mode for camera 4 be set to? (-1 = default, 0 = 8 bit, 1 = 12 bit, 2 = linear, 3 = real) Int -1 || 0 {Camera index - camera 4} What Andor camera index should camera 4 be initialized using (-1 = default order)? Int -1 || 0 {Cooling Temperature} What should the cooling temperature be set to? (C) Int -60 || 0 {Startup Temperature Threshold} How cool does the camera need to be before software startup can complete? (C) Int 30 || 0 {Andor Shutdown Temperature Threshold} How warm does the camera need to be during shutdown before the software exits? (C) Int -50 || 0 {Shutter Enable High} Should the shutter be driven high (+5v) to open? Bool true || 0 {Shutter Mode} What shuttering mode should be set on startup? (0 = Auto, 1 = Open, 2 = Closed) Int 1 || 0 {Advanced EM Mode} Should the advanced EM mode be enabled? This mode allows > 300x intensification and can cause premature CCD aging. Please use with caution to avoid hardware damage. Bool false || 0 {Debugging Level} Enable Andor driver debugging information (0 = disabled, 1 = critical errors, 2 = verbose) Int 0 || 0 [Andor SDK3 Properties] 1 Properties {Cooling Temperature} What should the cooling temperature be set to? (C) Int -30 || 0 [QImaging Properties] 9 Properties {Disable Camera Properties} Should all camera properties (gain, speed, port, offset, intensification) be disabled? This can be used for debugging purposes. Bool false || 0 {Fast Interpolation} Should the fast bayer mask decoding be enabled? Bool true || 0 {Enable Blackout Mode} Should the color LCD be turned off to reduce light pollution? Bool false || 0 {Enable Cooler} Should the camera cooler be set to active? Bool true || 0 {Enable Regulated Temperature Set Point} Should the camera be set to a regulated temperature set point (if the camera supports it)? Bool false || 0 {Regulated Temperature Set Point} If the cooler is active and the camera supports regulated cooling what should the temperature set point be (C)? Int -20 || 0 {Fan Speed} What fan speed should the camera run at (if the camera supports variable fan speed)? 1 = slow - 4 = fast Int 4 || 0 {Default Readout Speed} What default readout speed should the camera run at (0 = fastest)? Int 0 || 0 {Color Support} Does the camera have an LCD filter connected to it for color capture? Bool true || 0 [Prior] 8 Properties {XY Stage GetLocation Delay} Wait this may milliseconds before expecting a position response Int 25 || 0 {XY Stage SelectLocation Timeout} Wait at least this many seconds looking for expected response that the move is completed Int 60 || 0 {XY Step Size} How many um per step does the Prior XY stage move? Float 1.000000 || 0 {XY Stage Static Delay} How many seconds should the XY stage wait after the move completes to settle? Int 0 || 0 {XY Stage Debug Mode} Should the XY stage report failures during position moves? Bool false || 0 {Z Step Size} How many um per step does the Prior Z stage move? Float 0.100000 || 0 {Enable Compatibility Mode} Should the prior controller be set to compatibility mode? This should be set to yes unless you experience persistent warning messages. Bool true || 0 {Compatibility Mode Delay} How many milliseconds does it take to enable compatibility mode? Int 250 || 0 [Marzhauser Corvus] 3 Properties {Enable Venus Interpreter Mode} Enable the Marzhauser Venus interpreter mode (for Tango controllers)? Bool false || 0 {Enable Corvus Debugging Mode} Enable the Marzhauser Corvus debugging mode? Bool false || 0 {Corvus Baud Rate} What baud rate does the Corvus controller communicate at? Int 9600 || 0 [3i Fast Fiber Switcher] 4 Properties {Fiber Switcher Position 0} Galvonometer position for fiber switcher filter position 0 Int 0 || 0 {Fiber Switcher Position 1} Galvonometer position for fiber switcher filter position 1 Int 0 || 0 {Fiber Switcher Position 2} Galvonometer position for fiber switcher filter position 2 Int 0 || 0 {Fiber Switcher Position 3} Galvonometer position for fiber switcher filter position 3 Int 0 || 0 [Volume Rendering] 2 Properties {Enable Default Rendering Mode} Should SlideBook use the default rendering mode each time a new volume rendering is created? Bool true || 0 {Default Rendering Mode} What should the default rendering mode be (0 = dynamic, 1 = fixed, 2 = MIP, 3 = x-ray)? Int 2 || 0 [Statistics Properties] 2 Properties {Enable Background Subtraction} Should voxel intensities be background subtracted for all computations when a background region is available? Setting the property to false will produce results consistent with SlideBook 4 behavior. Bool false || 0 {MATLAB Desktop Application} Should MATLAB be opened by default as a full desktop application (true) or a console application (false)? Bool false || 0 [Memory Cache] 1 Properties {Cache Size x64 (GB)} What is the size of the x64 SlideBook memory cache in gigabytes? Float 22.997639 || 0 [Default View Settings] 7 Properties {Default Background Color Red} What is the default view background red color value (0-255)? Int 255 || 0 {Default Background Color Green} What is the default view background Green color value (0-255)? Int 255 || 0 {Default Background Color Blue} What is the default view background Blue color value (0-255)? Int 255 || 0 {Default Blend Background Percentage} What is the default blend background percentage (0-100)? Int 50 || 0 {Automatically Zoom New Views} Should SlideBook automatically compute zoom factor for new views? Bool true || 0 {Manual View Zoom Target Size} Target size for manual zoom factor (pixels). Set to -1 to manually zoom all data to original size (1-1 pixel). Int 512 || 0 {Show Tics for Notes} Should SlideBook show tic marks on the timelapse slider bar for each note annotation? Bool false || 0 [Lumencor Light Engine] 8 Properties {Simultaneous position (0)} Direct 8-bit control value for light engine filter position 10 Int 127 || 0 {Simultaneous position (1)} Direct 8-bit control value for light engine filter position 11 Int 127 || 0 {Simultaneous position (2)} Direct 8-bit control value for light engine filter position 12 Int 127 || 0 {Position Move Delay} How long should SlideBook wait (in milliseconds) after commanding a position change? Int 10 || 0 {ND Move Delay} How long should SlideBook wait (in milliseconds) after commanding an ND change? Int 10 || 0 {Filter Move Delay} How long should SlideBook wait (in milliseconds) after commanding a filter change? Int 100 || 0 {Direct Control Mode} Enable unshuttered (direct) control mode Bool false || 0 {Default ND Position} What neutral density position should the light engine default to (0-255)? Int 75 || 0 [EXFO Settings] 1 Properties {Open eXacte shutter - startup} Should the eXacte shutter open automatically when the neutral density control is initialized? Bool false || 0 [Spectral Applied LMM5] 8 Properties {Position 9 - Simultaneous} LMM5 filter position 9 should activate which laser lines? (1-255, binary) Int 0 || 0 {Position 10 - Simultaneous} LMM5 filter position 10 should activate which laser lines? (1-255, binary) Int 0 || 0 {Position 11 - Simultaneous} LMM5 filter position 11 should activate which laser lines? (1-255, binary) Int 0 || 0 {Position 12 - Simultaneous} LMM5 filter position 12 should activate which laser lines? (1-255, binary) Int 0 || 0 {Position 13 - Simultaneous} LMM5 filter position 13 should activate which laser lines? (1-255, binary) Int 0 || 0 {Position 14 - Simultaneous} LMM5 filter position 14 should activate which laser lines? (1-255, binary) Int 0 || 0 {Position 15 - Simultaneous} LMM5 filter position 15 should activate which laser lines? (1-255, binary) Int 0 || 0 {Position 16 - Simultaneous} LMM5 filter position 16 should activate which laser lines? (1-255, binary) Int 0 || 0 [3i CSU-X Bypass] 15 Properties {Position Move Delay} How long should SlideBook wait (in milliseconds) after commanding a position change? Int 500 || 0 {Homing Torque} Torque value for homing routine Int 32767 || 0 {Initialization Home Delay} How long should SlideBook wait (in milliseconds) after commanding the home routine? Int 1600 || 0 {Park Position} What device position should SlideBook park the actuator on shutdown? Int 1000 || 0 {Enable Debugging} Enable debugging mode Bool false || 0 {Position 0} Actuator device position for filter position 0 Int 1000 || 0 {Position 1} Actuator device position for filter position 1 Int 1000 || 0 {Position 2} Actuator device position for filter position 2 Int 1000 || 0 {Position 3} Actuator device position for filter position 3 Int 1000 || 0 {Position 4} Actuator device position for filter position 4 Int 1000 || 0 {Position 5} Actuator device position for filter position 5 Int 1000 || 0 {Position 6} Actuator device position for filter position 6 Int 1000 || 0 {Position 7} Actuator device position for filter position 7 Int 1000 || 0 {Position 8} Actuator device position for filter position 8 Int 1000 || 0 {Position 9} Actuator device position for filter position 9 Int 1000 || 0 [CoolLED] 1 Properties {Enable pE-100 TTL Control} Does the CoolLED controller have a pE-100 connected to the primary controller? Bool false || 0 [89 North Heliophor] 2 Properties {Enable simultaneous mode} Enable simultaneous LED excitation Bool false || 0 {Transmit delay} Additional static delay (ms) following receipt of OK from controller Int 0 || 0 jIIPPPPPPPPBub1_A11.crop $/Hw}7Hwׁ3dII does it63xLens the Polychrome IV to change wavelengths (ms)?   (lideBook Infod33?>C;O>??|BkII1.0 x?        "                                              "              !              )                             "                                                                                                                 [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[Nice onenIIp`!E????????UU'(((((((?hII- ~ E>8> t7jkSbJSdd|Q&]9 # # hv'2zv3Z:Junp  ?M$.M1P&LJ 0 ,ZR3pc)| 8*ZP @vW% j  G< r 3bTCWsb &OAX(dm/c0F4VyN; fU1#gZK)$5 /X/{ DgJVA\F:N#f"3N}d/wC ?lD0\  UIs9hhMb)!#q l +> cEI|Jnqi"',kA=` ?c ~D<o@pp5QYT Q B!H 3s Fb.B=O:NdzQJeb P^o ?Y:~ 6:DHGlN RCF w-ve@=$bwwp~X|/ p~bIfk Qj<;M 3rHK5r/ s)xxnc#r _"4.R~8Z9nG^Q|UQDG4m8nm(MWhm|C bX,M*)S!5 d;LeF3]\%Jj-m^=^.(kd ]~|R $4r w9S_ @;o]#z0TO/Dwox.!;cm:>8:uMFoij5\X`w[a-es|;]`_a Srgd$pqg!(Q[~xFf< 'J<8Qu%v _7)S?zR]F$vZy$W_5 7]U wU;{x)b 3W-[onV0 yK /5!AdknV # d3icR & 604!uzr q)S!<wRB2y:AGvU"tZ\ {  . 18B vj"Y "d, X{a FDpj!p n*]j`! j=wzDd.gR~l9L{L._c " 0t@, y  cAl  R,{atyUc9,! w73z1qJI<w5xmJg L 3tJLN1 N CvD"M(/&M{R%4(AYN6"RV,|Ype@"SMneRcNH = ^epo fqE4mam!`oT?2YsXt K yr aJR,Vm&k JDS U\OJpW 7"*prJ@TK4 E > i&DWM=7'?^,-5c@ >I  B Fy1 y{  }  dO|K1Q] '3 M 72[ , iyU7u _.i 8 P y {|  _=l4_n;*4  jsD>QnAfII\=  QY rr X]B^j`j*272$s*cA.<l"+`3 Hbm-pUlI1;^\/qHd *qN)2b    k0ZW=0 ylgLNaxE'KNuST,]w;O^L*g+ p @ O tv6idK&CJ k^hta5c"a2  %    nn `6GtO J Rs\@YOA7}n:`#} $  e; E!8Zo6CXT>`CY0si  f9YIH*mw  $  akO:*#>I  Ub:Ug9,)XSuOe n H W mhU);i<g>_9 r`dvA) ?MQF6v b {  m8 p_A9)o dOU1@TY` i \|Bqx[/8 W Z y Q  WG c.sC6Z jHJ`{Q=q -")xJuPkw[N 2 t . s6`]KAPwvo2`0jd{N|j@x 3(Z.BVx \E E nomzOk2 @&n@BND,dK F" .e/ D { H \,Qk:vGb2p2"t2EBf=akwel:[ >/"l*( t  o  ? # 20-o<-LS}-hyIu- 8$t1#, d 2a\ce&$Ab  RXrB yCfWZI& J.wD\3:<gZwK\o 1 , <E#uSq8rnWF R`%0 8 K/u{ z})5I!{o#?p6  O}QAWuPSLg+D^6Sz4(W&})FS s< z'X Kc!HJ5= x9Yi-ewfL(Ru}yiO@WrT?%T 4 *'%W^=rmr>?$ a".#(?&o\6O_BI. A AL)M <k%|O>O0  w jzx2F/2DJ 37E `{jNX?|>N f BXp4%#:$v0|w 2#D' qpuS .e)lw Yp 1 opW y[M8xWbX2f zLI q P<K!E?@,M0IgB  0 q$ K-~!4<U& Yp K\ ac/52BR~#Y s V 6xX7+X()h;ycbdT7,7nrxU!S 1}%Gw X]\gxY#OI8_oE37{/6,E:o V8 97O;Dd|l }BE _4L* -N{OK#z,{im5;AY. 3Il ]#B0z7orJf `kHri"B,+i \E5 9 2-EC tq8)(2a;+`f6y*48?->UcYHx/P3k7x,J_=clu1 \Y}{)dgh'M3WM e Dm+vIMa- 6?+4Jy.% !q7a"` Wg?]J  eT2Z"dbA}4Qy?H) {<d{9Eu6Fc&\ TyU{ Ec x5}W7kxt2\4iRc!WzGf~;  Vu/=U6s8HU Z%46s6ls}n7PT 1vi`^MOMO&'L u}o k]c%JxQIli+U+xJ, @aD2m|~[,&] B98#A. y WW 9/e ?]4#5e%LV/t&uW#- FW+"||:G:KLvzid@F8@7L`;xbD%i)E J3 z~@R:h2&%'rmnYlfSy4KYsXN*  :^J?V&eA?m_XgkZ}ix^ B tm| fj \f'(PHPq3d^AF! oL)dcZ8 l ]NZ{j1h -;>4E+2WaB?6RLbyfJ<]=^(0AM#%(/[NF*ICbLBwnJ SAZ H?,, RmoIITxh]NsoMNk?4 LCUvZ& L<`H[ixhAi0S1J:JGE^j`r-'\A3+q=GM? %8 8 w"YT X%7-@&o QnXx" ,)~Gl\,@-x MV sbPzJ2:)Kva*WrsAve*=|M"  ) C^tV1W_t_+Omh8 A;/2A*"q PVG|F{ @c"@WO"u0K36~l/tio`6 '2L>8Bblyjjq!WF.kes q#"k"H.F %JucIH bbcbwfOT>+H('ls U2yYCC.6:LaQJ gvyh"'69! Ik\*1E +#^ZtI(?%wc+mVwRU<R ,?w(~@E2#,07&[3)lI Ouek-i_hNUGt$ CPePCNy@F u#9ee6fR R;|;nBv{ 4@P<}OL,UJDM<kiW`yo_Q zU ,37(nZ4,t|.BpI<N/c>H,Q[sU]@QA) Go0CS_6ldjm'lOrR9TL _}IIXPPPPPPPP/4PL[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[7J}IIXPPPPPPPP/4 [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[{IIp`D0@PP :_~ {!m)18AH'PV\Zah'otz &QyRI!/o#{'07<D K3PT[$ajnuyr Wکɹ/9_/v;(~Xkai b ! !E\R& n{x  + OnK`V~\x2SI6;3wS'D7;S(x~qM̱x/ ,ҙCn}B{youuqn#jgdb\XWTQ$MHE>;31H-B(&p&$K#!}!4  q|5mr2I9g`S]uTK<qr}ܜS4fGkD.=À|zywwurrbpKm1m+l ih%hCdAdXaa _]\ZYWXwWTPT2R=QOYO7MLKJIIHTG_FD.DBB{A?>8=<{;O:9m986u65433x3A110H/.-,-+M+*P)@)(('&&b&$$ %l#N"! ! -P,Vp4}J=$X)gj]M|'`( ? {  X [  f t . ) f[5 JM;"Pm9  d]icSI1r<ZK+ xtW[LUC&FH.5 rif]jab]BHj/KC=1'6L-2"#(ymxpy{~lttq~qvrvmrthimtoujVn[_]\ahS``lp]^Y>QX^RXYG\d\OeD[iTT]QCVXYA\HYGTPRXQFOSQDEIKDWZSCOEF:O<b9E6@7BUCD<:37G3K:=;@74-80I8<9=A:?F>7C7489/=4<;7(54/:03.9034/0./0"/*.++0;5,--3.-(+2"(50,0&*"*'&".'02+%%-3/.'.*$.-%++(&1. 1*"%##+"*)!$/!'%#&$&."&- ("! ' ##%+!$ !"$& !("                                                                             iIIPPPPPPPPd7Iy{w|[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[gIIHPdq=> UA QŚELǒEmIIc488eIIc488XymI@P!H!" "P"!(!0!!!"!!"!!?Z???d!}IIXPPPPPPPP/4} [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[}IIXPPPPPPPP/4[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[v:}IIXPPPPPPPP/4[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[}IIXPPPPPPPP/4[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ŚELǒE