Generating test images

Sometimes it is nice to have a file of a specific size or pixel type for testing. To generate an image file (that contains a gradient image):

touch "my-special-test-file&pixelType=uint8&sizeX=8192&sizeY=8192.fake"

Whatever is before the first & is the image name; the remaining key-value pairs, each preceded with &, set the pixel type and image dimensions. Just replace the values with whatever you need for testing.

Additionally, you can put such values in a separate UTF-8 encoded .ini file:

touch my-special-test-file.fake
echo "pixelType=uint8" >> my-special-test-file.fake.ini
echo "sizeX=8192" >> my-special-test-file.fake.ini
echo "sizeY=8192" >> my-special-test-file.fake.ini

In fact, just the .fake.ini file alone suffices:

echo "pixelType=uint8" >> my-special-test-file.fake.ini
echo "sizeX=8192" >> my-special-test-file.fake.ini
echo "sizeY=8192" >> my-special-test-file.fake.ini

If you include a “[GlobalMetadata]” section to the ini file, then all the included values will be accessible from the global metadata map:

echo "[GlobalMetadata]" >> my-special-test-file.fake.ini
echo "my.key=some.value" >> my-special-test-file.fake.ini

The .ini file can also contain one section for each series, which allows metadata such as exposure times and positions to be set for each plane:

echo "[series_0]" >> my-special-test-file.fake.ini
echo "ExposureTime_0=10" >> my-special-test-file.fake.ini
echo "ExposureTimeUnit_0=ms" >> my-special-test-file.fake.ini
echo "PositionX_0=5" >> my-special-test-file.fake.ini
echo "PositionY_0=-5" >> my-special-test-file.fake.ini
echo "PositionZ_0=1" >> my-special-test-file.fake.ini
echo "PositionXUnit_0=mm" >> my-special-test-file.fake.ini
echo "PositionYUnit_0=mm" >> my-special-test-file.fake.ini
echo "PositionZUnit_0=mm" >> my-special-test-file.fake.ini

Several keys have support for units and can be expressed as KEY=VALUE UNIT where UNIT is the symbol of the desired unit:

touch "physicalSizesUnits&physicalSizeX=1nm&physicalSizeY=1nm&physicalSizeZ=1.5km.fake"
echo "physicalSizeX=1 nm" >> physicalSizes.fake.ini
echo "physicalSizeY=10 pm" >> physicalSizes.fake.ini
echo "physicalSizeZ=.002 mm" >> physicalSizes.fake.ini

High-content screening

To generate a simple plate file:

touch "simple-plate&plates=1&plateAcqs=1&plateRows=1&plateCols=1&fields=1.fake"
touch "default-plate&plates=1.fake"
touch "default-plate&screens=0&plates=1.fake"

These will each create a single plate without a containing screen, by default in the first two cases. In the third case setting screens to zero is used to document the lack of a screen. As above a .fake.ini file can be used.

To generate a simple screen file:

touch "default-screen&screens=1.fake"

This will create a screen containing a single simple plate.

To generate a valid plate at least one of screens, plates, plateAcqs, plateRows, plateCols and fields must be greater than zero. If this condition is met then any other plate-specific values set to zero will be ignored and the defaults used. So, for example, the file:

one-key-set&screens=0&plates=0&plateRows=0&plateCols=0&plateAcqs=0&fields=1.fake

will create a simple plate with no screen.

Regions

To generate a fake file containing regions of interest:

touch "regions&points=10.fake"
touch "regions&ellipses=20.fake"
touch "regions&rectangles=5&lines=25.fake"

Replace regions in the above examples with the desired image or plate which will contain the regions, e.g.

touch "HCSanalysis&plates=1&plateRows=16&plateCols=24&rectangles=100.fake"

For each shape type, the value will specify the number of regions of interest to create where each region of interest contains a single shape of the input type. By convention, all generated regions of interests are not associated to any given Z, C or T plane.

Key-value pairs

There are several other keys that can be added, a complete list of these, with their default values, is shown below.

Key Value Default
sizeX number of pixels wide 512
sizeY number of pixels tall 512
sizeZ number of Z sections 1
sizeC number of channels 1
sizeT number of timepoints 1
thumbSizeX number of pixels wide, for the thumbnail 0
thumbSizeY number of pixels tall, for the thumbnail 0
pixelType pixel type uint8
bitsPerPixel number of valid bits (<= number of bits implied by pixel type) 0
rgb number of channels that are merged together 1
dimOrder dimension order (e.g. XYZCT) XYZCT
orderCertain whether or not the dimension order is certain true
little whether or not the pixel data should be little-endian true
interleaved whether or not merged channels are interleaved false
indexed whether or not a color lookup table is present false
falseColor whether or not the color lookup table is just for making the image look pretty false
metadataComplete whether or not the metadata is complete true
thumbnail whether or not CoreMetadata.thumbnail is set false
series number of series (Images) 1
lutLength number of entries in the color lookup table 3
scaleFactor the scaling factor for the pixel values on each plane 1
exposureTime time of exposure null
acquisitionDate timestamp formatted as “yyyy-MM-dd_HH-mm-ss” null
screens number of screens 0
plates number of plates to generate 0 [1]
plateAcqs number of plate runs 0 [1]
plateRows number of rows per plate 0 [1]
plateCols number of columns per plate 0 [1]
fields number of fields per well 0 [1]
withMicrobeam whether or not a microbeam should be added to the experiment (HCS only) false
annLong, annDouble, annMap, annComment, annBool, annTime, annTag, annTerm, annXml number of annotations of the given type to generate 0
physicalSizeX real width of the pixels, supports units defaulting to microns  
physicalSizeY real height of the pixels, supports units defaulting to microns  
physicalSizeZ real depth of the pixels, supports units defaulting to microns  
color the default color for all channels null
color_x the color for channel x, overrides the default color for that channel  
ellipses, labels, lines, points, polygons, polylines, rectangles the number of ROIs containing one shape of the given type to generate  
ExposureTime_x floating point exposure time for plane x [2]  
ExposureTimeUnit_x string defining the units for the corresponding ExposureTime_x [2] seconds
PositionX_x floating point X position for plane x [2]  
PositionXUnit_x string defining the units for the corresponding PositionX_x [2] microns
PositionY_x floating point Y position for plane x [2]  
PositionYUnit_x string defining the units for the corresponding PositionY_x [2] microns
PositionZ_x floating point Z position for plane x [2]  
PositionZUnit_x string defining the units for the corresponding PositionZ_x [2] microns
[1](1, 2, 3, 4, 5) Default value set to 1 if any of the screens, plates, plateAcqs, plateRows, plateCols or fields values is set to a value greater than zero.
[2](1, 2, 3, 4, 5, 6, 7, 8) Must be stored in the INI file under a [series_n] section, where n is the 0-based series index.

For full details of these keys, how unset and default values are handled and further examples see loci.formats.in.FakeReader.

You can often work with the .fake file directly, but in some cases support for those files is disabled and so you will need to convert the file to something else. Make sure that you have Bio-Formats built and the JARs in your CLASSPATH (individual JARs or just bioformats_package.jar):

bfconvert test&pixelType=uint8&sizeX=8192&sizeY=8192.fake test.tiff

If you do not have the command line tools installed, substitute loci.formats.tools.ImageConverter for bfconvert.