We're Hiring!

Can't see the meta info from OMERO.insight

General and open developer discussion about using OMERO APIs from C++, Java, Python, Matlab and more! Please new questions at https://forum.image.sc/tags/omero
Please note:
Historical discussions about OMERO. Please look for and ask new questions at https://forum.image.sc/tags/omero

If you are having trouble with custom code, please provide a link to a public repository, ideally GitHub.

Can't see the meta info from OMERO.insight

Postby bhcho » Tue May 25, 2010 9:28 pm

Hi all,

I inserted some meta info (NominalMagnification and LensNA of the Objective) to an ome-tiff file by manually parsing and editing the ome-xml header of the image file.
After I upload it via OMERO.importer (uploading was successful), I tried to see if the OMERO.insight will show me that meta info correctly. But I could not see any meta info. from the "Acqusition" tab of the OMERO.sight. (which is on the right panel)

Did I miss something when I manually insert the meta info?

here's the ome-xml meta info.


Code: Select all
<?xml version="1.0" encoding="UTF-8"?><!-- Warning: this comment is an OME-XML metadata block, which contains crucial dimensional parameters and other important metadata. Please edit cautiously (if at all), and back up the original data before doing so. For more information, see the OME-TIFF web site: http://ome-xml.org/wiki/OmeTiff. -->
<OME xmlns:AML="http://www.openmicroscopy.org/Schemas/AnalysisModule/2008-09" xmlns:Bin="http://www.openmicroscopy.org/Schemas/BinaryFile/2008-09" xmlns:MLI="http://www.openmicroscopy.org/Schemas/MLI/2008-09" xmlns:SA="http://www.openmicroscopy.org/Schemas/SA/2008-09" xmlns:OME="http://www.openmicroscopy.org/Schemas/OME/2008-09" xmlns:SPW="http://www.openmicroscopy.org/Schemas/SPW/2008-09" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:CA="http://www.openmicroscopy.org/Schemas/CA/2008-09" xmlns:STD="http://www.openmicroscopy.org/Schemas/STD/2008-09" xmlns:CLI="http://www.openmicroscopy.org/Schemas/CLI/2008-09" xmlns="http://www.openmicroscopy.org/Schemas/OME/2008-09" xsi:schemaLocation="http://www.openmicroscopy.org/Schemas/OME/2008-09 http://www.openmicroscopy.org/Schemas/OME/2008-09/ome.xsd http://www.openmicroscopy.org/Schemas/BinaryFile/2008-09 http://www.openmicroscopy.org/Schemas/BinaryFile/2008-09/BinaryFile.xsd http://www.openmicroscopy.org/Schemas/CA/2008-09 http://www.openmicroscopy.org/Schemas/CA/2008-09/CA.xsd http://www.openmicroscopy.org/Schemas/SPW/2008-09 http://www.openmicroscopy.org/Schemas/SPW/2008-09/SPW.xsd http://www.openmicroscopy.org/Schemas/STD/2008-09 http://www.openmicroscopy.org/Schemas/STD/2008-09/STD.xsd" UUID="urn:uuid:ce8e04a9-5d8a-4016-8a07-fcd212ec2553">
<Instrument ID="Instrument:0">
<Objective ID="Objective:0">
<LensNA>1.3</LensNA>
<NominalMagnification>100</NominalMagnification>
</Objective>
</Instrument>
<Image ID="Image:0">
<LogicalChannel ID="LogicalChannel:0" SamplesPerPixel="1"/>
<Pixels BigEndian="true" DimensionOrder="XYCZT" ID="Pixels:0" PixelType="uint8" SizeC="1" SizeT="1" SizeX="768" SizeY="512" SizeZ="1">
<TiffData>
<UUID FileName="img2.ome.tif">urn:uuid:ce8e04a9-5d8a-4016-8a07-fcd212ec2553</UUID>
</TiffData>
</Pixels>
</Image>
</OME>
bhcho
 
Posts: 236
Joined: Mon Apr 05, 2010 2:15 pm

Re: Can't see the meta info from OMERO.insight

Postby jburel » Wed May 26, 2010 11:25 am

Hi

The image is not linked to the instrument.
You will need to add something like:
Code: Select all
<Image ...>
<InstrumentRef ID="urn:lsid:-.-:Instrument:0"/>
</Image>


Jmarie
User avatar
jburel
Team Member
 
Posts: 348
Joined: Thu May 21, 2009 6:38 pm
Location: dundee

Re: Can't see the meta info from OMERO.insight

Postby bhcho » Wed May 26, 2010 3:10 pm

thank you so muh jburel.

after I inserted the following lines in my java code,
Code: Select all
      String inst= omexmlMeta.getInstrumentID(0); // omexmlMeta is IMetadata
      omexmlMeta.setImageInstrumentRef(inst,0);


Now I can see the inserted information (Nominal magnification and Lens NA of Objective) at the Microscope tab. But I still don't see anything in the Original Metadata (see attached image). when I downloaded, it's just

[GlobalMetadata]
[SeriesMetadata]

Is it common thing? or
Am I still missing something? the updated ome-xml part is below.

Code: Select all
<?xml version="1.0" encoding="UTF-8"?><!-- Warning: this comment is an OME-XML metadata block, which contains crucial dimensional parameters and other important metadata. Please edit cautiously (if at all), and back up the original data before doing so. For more information, see the OME-TIFF web site: http://ome-xml.org/wiki/OmeTiff. -->
<OME xmlns:AML="http://www.openmicroscopy.org/Schemas/AnalysisModule/2008-09" xmlns:Bin="http://www.openmicroscopy.org/Schemas/BinaryFile/2008-09" xmlns:MLI="http://www.openmicroscopy.org/Schemas/MLI/2008-09" xmlns:SA="http://www.openmicroscopy.org/Schemas/SA/2008-09" xmlns:OME="http://www.openmicroscopy.org/Schemas/OME/2008-09" xmlns:SPW="http://www.openmicroscopy.org/Schemas/SPW/2008-09" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:CA="http://www.openmicroscopy.org/Schemas/CA/2008-09" xmlns:STD="http://www.openmicroscopy.org/Schemas/STD/2008-09" xmlns:CLI="http://www.openmicroscopy.org/Schemas/CLI/2008-09" xmlns="http://www.openmicroscopy.org/Schemas/OME/2008-09" xsi:schemaLocation="http://www.openmicroscopy.org/Schemas/OME/2008-09 http://www.openmicroscopy.org/Schemas/OME/2008-09/ome.xsd http://www.openmicroscopy.org/Schemas/BinaryFile/2008-09 http://www.openmicroscopy.org/Schemas/BinaryFile/2008-09/BinaryFile.xsd http://www.openmicroscopy.org/Schemas/CA/2008-09 http://www.openmicroscopy.org/Schemas/CA/2008-09/CA.xsd http://www.openmicroscopy.org/Schemas/SPW/2008-09 http://www.openmicroscopy.org/Schemas/SPW/2008-09/SPW.xsd http://www.openmicroscopy.org/Schemas/STD/2008-09 http://www.openmicroscopy.org/Schemas/STD/2008-09/STD.xsd" UUID="urn:uuid:beb0d8e6-5dc1-47c1-8d05-ea50e1eb7f96">
<Instrument ID="Instrument:0">
<Objective ID="Objective:0">
<LensNA>1.3</LensNA>
<NominalMagnification>100</NominalMagnification>
</Objective>
</Instrument>
<Image ID="Image:0">
<InstrumentRef ID="Instrument:0"/>
<LogicalChannel ID="LogicalChannel:0" SamplesPerPixel="1"/>
<Pixels BigEndian="true" DimensionOrder="XYCZT" ID="Pixels:0" PixelType="uint8" SizeC="1" SizeT="1" SizeX="768" SizeY="512" SizeZ="1">
<TiffData>
<UUID FileName="img4.ome.tif">urn:uuid:beb0d8e6-5dc1-47c1-8d05-ea50e1eb7f96</UUID>
</TiffData>
</Pixels>
</Image>
</OME>
Attachments
OMERO.insight.jpg
OMERO.insight.jpg (32.32 KiB) Viewed 2124 times
bhcho
 
Posts: 236
Joined: Mon Apr 05, 2010 2:15 pm

Re: Can't see the meta info from OMERO.insight

Postby jburel » Thu May 27, 2010 10:43 am

Hi
There is no guarantee that the info will be in the Original Metadata file created while importing the image and then displayed in the Original Metadata section.

If it is critical, we will have to review sections of the import process.
Thanks for your feedback

jmarie
User avatar
jburel
Team Member
 
Posts: 348
Joined: Thu May 21, 2009 6:38 pm
Location: dundee


Return to Developer Discussion

Who is online

Users browsing this forum: Google [Bot] and 0 guests